Homeowners have many different options when it comes to installing new material to their flooring plans. You can install vinyl, wood, or laminate to make your flooring look astound and appealing. Depending on where you’re trying to install your new flooring, you’ll want to know about the estimated costs associated with these materials. The estimate can also be assessed by the style, the color, the finish, or the various possible arrangements you’ll need to make.
On average, the total range of installing new flooring into your home will probably be anywhere from $600 to $4000. The low-end estimate to install any of the three options listed above will range between $400 to $500. The high-end estimate will probably range between $4500 to $8000.
| Average Range | $600-$4000 |
| Low-End Range | $400-$500 |
| High-End Range | $4500-$8000 |
Homeowners need to know that the cost estimates above are based on the flooring options that are mentioned below. There are many different choices that homeowners need to consider before arranging your budget according to the full estimate.
Table of Contents
Vinyl Flooring Installation Cost
Vinyl is probably the most affordable option out of the three floor installation options. It has enough durability and the installation can be swift and simple. Homeowners have the benefit of keeping a flooring layout that can last up from up to ten or even 20 years. Although tile and wood might have longer lifespans, one of the many benefits that vinyl flooring has is how biddable it is with damp areas.
Homeowners will have the choice of installing sheeting, vinyl composite tiles, luxury vinyl tiles, luxury vinyl planks, and vinyl planks. Depending on the one you choose, the cost will range from $1 to $7 per square foot. Homeowners should especially consider the benefits of each one before they make their decision.
| Material | Cost Range Per Sq Ft |
| Sheet Vinyl | $1-$2 |
| Vinyl Composite Tile | $1-$4 |
| Luxury Vinyl Til | $1.50-$10 |
| Luxury Vinyl Plank | $1.50-$12 |
| Vinyl Plank | $2-$7 |
The prices that are associated with the flooring project you had in mind. You’ll want to know the differences between each of the materials listed above. There are different cost ranges associated with vinyl flooring.
Sheet Vinyl Installation Cost
Homeowners that are interested in sheets will probably spend an average of $1 to $2 per square foot. This option is not only the most affordable installation materials, but also one of the simplest installation options available. Prepared in both rolls and pre-cut sheets, the vinyl sheet will measure from six to 12 inches wide.
Vinyl Composite Tile Installation Cost
Also known as a VCT installation, the vinyl composite tile will cost about $1 to $4 per square foot to finish. It is a material that is made from multiple layers and manufactured as a resilient product. The tiles have two installation methods: adhesively installed for a more permanent installation or click-lock installed for a floating floor installation. Keep in mind that VCT comes in many different sizes, thickness levels, and designs, so there are many different factors to think about.
Luxury Vinyl Tile Installation Cost
A luxury vinyl tile installation will cost homeowners about $1.50 to $10 per square foot. The reason why this range is so high is because of the quality that the LVT brings to the project. Luxury vinyl materials are not only thicker than the standard vinyl, but also have embossed embroidery for homeowners that want a more ornamental look to their spaces. The LVT can replicate wood and stone, giving your floors a longer lifespan. The thicker wear layer, which would generally be the urethane, is typically the surface layer on top.
Luxury Vinyl Plank Installation Cost
The LVP installation is another luxurious installation option. It ranges from $1.50 to $12 per square foot and like its tile counterpart, is a thicker than usual material with an enduring top layer. With a more engaging appearance, the luxury vinyl plank, although similar to the tile option in every way, has a livelier replication to wood grains.
Vinyl Plank Flooring Installation Cost
In comparison to the tile and the plank options, the vinyl plank flooring will start out as the thicker option in some cases, however, they won’t have the wide array of styles or designs. Homeowners will have to spend an estimate of about $2 to $7 per square foot for this sort of project. Although the quality is more common, the standard vinyl plank exacts the same purposes of the other floor installation options: click-lock and glue. Homeowners need to keep in mind that vinyl flooring, like laminate flooring installations, will affect the cost according to the material’s thickness levels. Thinner planks are more challenging to install, while thicker components are less difficult, but a little more expensive, in comparison.
Laminate Flooring Installation Cost
The major difference between laminate flooring and other flooring installations are the qualities they bring to high-impact spaces. Since laminate has no seams, homeowners will have a much easier time with cleaning them. Another reason as to why people love laminate is how resistant they are to scratches. However, before you make the choice of installing laminate, you should know the fragility that laminate has with moisture.
Costing about $3 to $8 per square foot in materials and labor, laminate floor installations, like most home projects, will require the coverage of the installation. All flooring projects have the possibility of configuring their subflooring and it really depends on. Like wood and vinyl, laminate has a few different types that you could choose from. A majority of the different laminate options should only cost about $0.68 per square foot, however, the more sought after products will probably cost around $0.89 to $1.60 per square foot.
| Acacia | $0.68 |
| Cherry | $0.68 |
| Beech | $0.68 |
| Maple | $0.68 |
| Oak | $0.68 |
| Walnut | $0.89 |
| Elm | $1.60 |
| Hickory | $1.60 |
There are different features that will need to be added, depending on what kind of applications you want with your laminate. While scratch resistance, insulation, and cork underlayment installations are somewhat inherent, however, other features will include waxing services, noise and water resistant features, and other materials that can be attached for the underlayment.
The added features will probably range between $0.68 to $3.40 per square foot. Keep in mind that the features mentioned above should not only affect the appeal and appearance of your spaces, but also provide a sense of protection against different conditions.
Bamboo Flooring Installation Cost
The average range of installing bamboo flooring is about $600 to $5000. One of the major benefits to installing bamboo is the variety it has in eco-consciousness and appearance. There are three choices that matter to homeowners: engineered bamboo, solid bamboo, or strand-woven bamboo. Each of these arrangements can affect the way your interior will look once the project is completed.
The cost per square foot for such a project will probably range between $3 to $13, but the overall range for the project will likely be about $6 to $25 per square foot including the cost of labor.
Engineered Bamboo Flooring Costs
Particularly, the creation of engineered bamboo comes from plywood, layered with a thin coat of bamboo. Homeowners will install engineered bamboo to their flooring layout to ensure that damp areas, like the kitchen or moisture-excessive homes, won’t affect their living conditions. Due to the thin layer, however, homeowners probably won’t have any finishing options with their flooring. Although this is the case, there are exceptions when it comes to the thickness of the bamboo. Homeowners might be able to refinish the wood at least one or two times, but they need to look for the right material beforehand.
Solid Bamboo Flooring Costs
The way bamboo flooring is typically made is with the construction methods: horizontal, vertical, and industrial. Although the cost per square foot is calculated by this means, the estimate accounts for the amount of layers that are tacked on according to the thickness of the solid bamboo. Typically, the thickness of your location’s flooring will provide balanced stability and higher durability.
Horizontal Bamboo Set-Up Costs
Installation for a horizontal set-up will probably range between $3 to $5 per square foot. Essentially, the flooring will consist of laying the bamboo horizontally and gluing the arrangement by your specifications. Categorized in different thickness levels, the horizontal bamboo set-up is the most standardized and common way of installing the wood’s flooring.
Vertical Bamboo Set-Up Costs
The vertical bamboo installation will probably cost homeowners an average of $4 to $10 per square foot. Often referred to as strip bamboo, these set-ups are generally laid by a side-to-side arrangement, rather than the common end-to-end used for horizontal installations. One of the benefits from this kind of set-up comes from the visibility of the knuckles and the lack thereof.
The pattern is thinner, however, the material is emphasized. Although there are some cases where the vertical flooring is thicker, it is due to the construction that makes this particular arrangement more evident. The estimate is reflected from the amount of bamboo used for the installation with vertical set-ups, since typically, the vertical arrangement will have a higher quantity of the solid material.
Industrial Bamboo Set-Up Costs
The cost range with installing industrial bamboo is estimated to be between $5 to $12 per square foot. It is essentially used for construction, utilizing a step pattern rather than the typical strip pattern. Since the flooring coincides with construction rather than the side-to-side or end-to-end patterns mentioned above, industrial bamboo installations can offer a wide variety of unique appearances on your flooring plans. Each of these set-ups will use solid bamboo flooring.
Strand-Woven Bamboo Flooring Costs
Homeowners will spend an average of $4 to $10 per square foot for installing strand-woven bamboo flooring. Qualities of strand-woven bamboo flooring correlates with eco-consciousness, which substitutes the quality of the flooring’s appearance. The environmental-friendly aspects come from the implication of the name of the bamboo, which is the separate strands that are broken down and maintained by glue and resin. Strand-woven bamboo is long-lasting and can be a harder alternative to solid and engineered bamboo. One of the pivotal features that strand-woven bamboo flooring offers is its customizable appearances, giving homeowners an array of different options.
Wood Flooring Installation Cost
Homeowners typically opt for wood when it comes to repurposing their flooring plans. Whether it’s for renovation purposes or for a construction project, wood flooring has many tasteful options for homeowners to think about. The range in costs to install wood flooring into your home will likely be estimated between $14 to $32 per square foot.
| Wood Options | Cost Range Per Sq Ft |
| Oak | $3-$5 |
| Cherry | $3-$5 |
| Engineered Hardwood | $3-$5 |
| Bamboo | $3-$6 |
| Parquet | $3.50-$6 |
| Pine | $4-$7 |
| Maple | $5-$8 |
| Mahogany | $6-$8 |
Oak Refinishing Costs
Ranging between $3 to $5 per square foot, oak is probably the most common hardwood finish to be expected by homeowners. Considering the fact that contractors and refinishing specialists are likely well-versed with installing this type of hardwood, the process for this kind of job is straightforward. There are two customary palettes when it comes to installing oak flooring, either white or red.
Cherry Refinishing Costs
If you want to create a warmer interior, cherry provides the deepened, rich hue of red undertones. Reasonably priced from $3 to $5 per square foot, cherry hardwood is probably one of the most durable materials out in the market. In certain cases, cherry finishes might not need to be sanded if they’re in good enough condition.
Engineered Hardwood Refinishing Costs
If the hardwood installation you’re seeking is a hardwood type that is about two millimeters or less from your area’s surface, then engineered hardwood might be what you’re looking for. It’ll cost about $3 to $5 per square foot. One of the most popular qualities of engineered hardwood is that it doesn’t warp or expand like solid wood. The major flaw to hardwood is that the environment of where the installation is arranged may negatively impact your flooring. And it’s easy to install.
Knowing whether you need to refinish your engineered hardwood boils down to knowing whether the thickness levels of your flooring are worn down. Typically wear layers should be more than two millimeters in thickness and should not be sanded down if this minimum is obstructed. Keep in mind that acrylic impregnated wear layers cannot be sanded and refinished, the service for these kinds of floors should only be screened and recoated.
Bamboo Refinishing Costs
Although the bamboo finish can be quite cumbersome to refinish, it is one of the most durable hardwoods to find. Bamboo is made to look natural and has brighter palettes compared to the rest of the options listed. Homeowners should seriously consider the permanence of bamboo flooring since it’s quite difficult to sand down and refinish with another type in the future. Costing between $3 to $6 per square foot, bamboo is manufactured with a certain amount of adhesives. This makes it an easy target for scratching and denting. However, bamboo is renowned for its appearance and its durability, making it a perfect asset for homeowners with a certain kind of taste and practicality.
Parquet Refinishing Costs
Parquet is peculiar and unique in appearance, in the way that grain is run in various perspectives. Priced at around $3.50 to $6 per square foot, the parquet flooring is still one of the more affordable options but the material can be easily damaged. Parquet has a fluctuation between bold and light colors, designed to provide a farmhouse effect with your flooring. It is typically arranged with lighter and darker brown wood. Homeowners are typically refinishing their floors with parquet due to the stability that they provide and the patterns that are displayed throughout the surface.
Pine Refinishing Costs
Refinishing your flooring with pine will range between $4 to $7 per square foot. Although pine is resilient and stable in nature, it is a softer option compared to the ones being mentioned. The process for refinishing pine will need a little more oversight to complete, depending on the level of expertise by your hired professional. The palette for pine includes a rich blend of both brown and red mixed with a golden yellow hue. It pairs well with lighter interior styles and will match a rustic aesthetic within your home’s spaces.
Maple Refinishing Costs
Maple flooring consists of darker brown colors that transition into light brown colors, almost pale hues that run along the color coordinations. This type of wood is specialized for homeowners that like the fluctuating aesthetic, with dark brown grains traversing the surface. Costing about $5 to $8 per square foot, maple is a material with a grander scale of hardness. To smooth the surface, the wood expert will use specialized sandpaper to make the maple look nice. Homeowners that are planning to stain maple will come across some challenges due to the quality of the wood.
Mahogany Refinishing Costs
Refinishing jobs that involve mahogany will require more careful hands when sanding the wood. Your hired professional will take serious notice into preventing damages to your floors. It will cost about $6 to $8 per square foot to finish this sort of project and since this is a gentler wood variation, homeowners should seriously consider hiring a specialist in regards to this material. Mahogany is flexible when it comes to interior styles. Since it retains a darker hue, mahogany fits well with modern and contemporary appearances within the spaces it is installed.
Finding Multiple Estimates Through House Tipster
There are many different costs and estimates associated with projects involving your floors. To perform and execute this kind of work, you’ll want professional assistance according to your preferences. Our web tool has two functions that can help you shorten your time in searching and hiring a professional that’s right for you.
House Tipster enables users to send messages about inquiries and estimates or leave reviews of the listings that the users are either currently working with or have previously worked with in the past. The professional listings throughout your area could have the right requirements that you need to perfect that renovation or installation you’ve been looking to implement.
With our two key features, you’ll have a whole new way to bring your taste to life. Use House Tipster to find the listings in your area and find out ways to make your project both affordable and sufficient.
Featured Image By Darren Richardson On Unsplash
